Ricoh 340 Benutzerhandbuch

COPYING

Setting Originals In The
Document Feeder

Note

❒ Do not stack originals above the

limit mark.

❒ When copying thin originals (41 –

52 g/m

, 11 – 14 lb), select

[DF Set-

ting]

and set to Thin Paper mode,

or set your originals on the expo-
sure glass to avoid damage due to
a multi-sheet feed (if several sheets
are fed together at the same time).
See

⇒

P.35 “Thin paper mode”.

❒ The original might become dirty if

it is written with a pencil or similar
tools.

❒ For 1-sided originals, you can se-

lect the ADF tray or the ADF exter-
nal tray as an output tray. See “22.
ADF Orig. Ejection” in the System
Settings.

1: ADF tray
2: ADF external tray

❒ Copying or scanning speed might

be a little reduced if the ADF tray is
selected as an output tray.

Reference

Regarding originals that the docu-
ment feeder can handle, see

⇒

P.20

“Originals”.

Setting a stack of originals in the
document feeder

Adjust the guide to the original
size.

Set the aligned originals face up
into the document feeder.

1: Limit mark
2: Document guide

Note

❒ To avoid a multi-sheet feed,

shuffle the originals before set-
ting them in the document feed-
er.

When SADF mode is selected

Reference

See

⇒

P.33 “SADF mode”.

Set one original face up into the
document feeder. Then, press the

{

Start

} key.

The Auto Feed indicator is lit.

Set the next original while the
Auto Feed indicator is lit.

ND1D04EE

ND1D01EE