Brocade Communications Systems 825 Benutzerhandbuch

Port Properties panel (HBA only)

A

Using the property panel

Refer to the following topics for specific procedures using this dialog box:

•

•

•

•

•

•

Queue Depth

The number of I/O operations that can be run in parallel on a device.

Interrupt Control Coalesce

Indicates whether interrupt control is on or off.

Interrupt Control Latency

Sets the interrupt control latency value.

Interrupt Control Delay

Sets the interrupt control delay value.

Beacon State

Indicates whether beaconing is on or off.

Link Beacon State

Indicates whether link beaconing is on or off.

MPIO Mode State

Indicates whether multipathing mode is on or off.

Path Time Out

The value between 0 to 60 that specifies the time out session. Note 
you can only enable or edit the path time out when MPIO is disabled.

Logging Level

The port logging level. Values include Log Critical, Log Error, Log 
Warning, and Log Info.

Persistent Binding

Indicates whether persistent binding is on or off.

Target Rate Limit

Indicates whether target rate limiting is on or off.

Default Rate Limit

Select the target rate limit from the list. Options include 1 Gbps (the 
default), 2 Gbps, and 4 Gbps.

Authentication

Indicates whether FC-SP authentication is on or off.

Status

The status of FC-SP authentication.

Algorithm

The configured authentication algorithm.

Group

The DH Group (DH Null, group 0 is the only option).

Error Status

The health status of the Fibre Channel Security Protocol parameters.

Configured QoS State

Indicates whether QoS is enabled or disabled.

Operating QoS State

Indicates whether QoS is online or offline.

Total BB Credit

The number of receive buffers.

Priority Levels

QoS priority levels. Values include High, Medium, and Low.

Field

Description