Intel ECB-865 Benutzerhandbuch
User’s Manual
64
ECB-865 User’s Manual
4.3.6 Peripheral Setup Defaults
This section describes I/O resources assignment for all of on-board peripheral devices.
4.3.6.1 OnBoard
FDC
This option enables the floppy drive controller onboard. The settings are Auto, Enabled, or
Disable
Disable
d.
4.3.6.2 OnBoard Serial Port1
This option enables serial port 1 onboard and specifies the base I/O port address for serial
port 1. The settings are Auto, Disabled, 3F8h, 3E8h, 2E8h, and 2F8h. The Fail-Safe
default setting is Auto.
This option enables serial port 1 onboard and specifies the base I/O port address for serial
port 1. The settings are Auto, Disabled, 3F8h, 3E8h, 2E8h, and 2F8h. The Fail-Safe
default setting is Auto.
4.3.6.3 OnBoard Serial Port2
This option enables serial port 2 onboard and specifies the base I/O port address for serial
port 2. The settings are Auto. Disabled, 3F8h, 2F8h, 3E8h, and 2E8h. The default setting
is Auto.
This option enables serial port 2 onboard and specifies the base I/O port address for serial
port 2. The settings are Auto. Disabled, 3F8h, 2F8h, 3E8h, and 2E8h. The default setting
is Auto.