Raritan Engineering MCCAT116 Benutzerhandbuch
Connecting Computers
6
r
Admin port
Connects to a computer via a serial cable for upgrading the
MCCATʹs firmware.
MCCATʹs firmware.
s
HD15 video port
Connects to a monitor for displaying the MCCAT OSD and the
video of the accessed computer.
video of the accessed computer.
t
Channel ports
Connect to computers via standard Cat5 UTP cables. The number
of available channels varies depending on the model you
purchased.
of available channels varies depending on the model you
purchased.
Connecting Computers
Prepare the following components or devices before connecting
computers to the MCCAT unit:
computers to the MCCAT unit:
Cat5 UTP cables (one cable per computer)
Computer Interface Modules (CIMs): MCIM‐PS2 or MCIM‐USB
(one CIM per computer)
A standard keyboard
A standard 2‐wheel mouse
A standard monitor
Note: For better video quality, the use of “Belden” Cat5 UTP cable is strongly
recommended.
recommended.
1. Make sure the MCCAT unit and all devices are powered OFF,
including the monitor and computer(s) that you want to connect.
2. Attach a PS/2 or USB CIM to the computer:
If the CIM is a PS/2 CIM:
Connect the PS/2 mouse connector of the CIM to the PS/2 mouse
port of the computer.
Connect the PS/2 keyboard connector of the CIM to the PS/2
keyboard port of the computer.