Raritan Engineering MCCAT116 Benutzerhandbuch
The Security Feature
24
Accessing the System in the Security Mode
After the system or the MCCAT unit enters the security mode, a message
“Security Mode Protected”appears on the screen. Do the following to
access the system:
“Security Mode Protected”appears on the screen. Do the following to
access the system:
1. Press any key and the prompt message “Password:” appears.
2. Type either the administrator (Admin) or user password and press
Enter. Unless changed, type one of the default passwords shown
below.
below.
User Type
Default Password
(case sensitive)
(case sensitive)
Administrator (Admin)
raritan
User1
111
User2
222
User3
333
User4
444
User5
555
Video of the currently selected channel appears on the screen if the
password is entered correctly. Now you can activate the OSD or press the
channel button to access any channel in the system.
password is entered correctly. Now you can activate the OSD or press the
channel button to access any channel in the system.
Changing Passwords
MCCAT provides one administrator (Admin) password and five user
passwords by default. These passwords allow you to access the system
after it enters the security mode. It is strongly recommended to change
the default passwords before turning on the security feature.
passwords by default. These passwords allow you to access the system
after it enters the security mode. It is strongly recommended to change
the default passwords before turning on the security feature.
1. (Optional) If the OSD is not onscreen, press the hot key twice
QUICKLY (default: Scroll Lock) to activate it.
2. Press F5 and the prompt message “Admin. Password” appears on the
screen.