Compaq 164SX Benutzerhandbuch

Memory and Microprocessor Configuration

For higher system speed or greater throughput, SDRAM memory can be upgraded 
by replacing DIMMs with those of greater size. 

When configuring or upgrading SDRAM, observe the following rules: 

Each DIMM must be a 168-bit unbuffered version and have a frequency of          
100 MHz.

Each bank consists of two DIMMs and must be fully populated.

Both DIMMs in the same bank must be of equal size.

Although not an exhaustive list, Table 5–1 lists the tested SDRAM memory 
configurations available. As additional configurations become available, they will be 
posted in online revisions of this manual on the Alpha OEM World Wide Web 
Internet site. See Appendix A for the URL.

For a list of vendors who supply components and accessories for the 
AlphaPC 164SX, see Appendix A.

Refer to Figure 2–1 for DIMM connector locations.

1Mb × 72 and 1Mb × 64 DIMMs are not supported.