Intel ATC6430M Benutzerhandbuch

Seite von 40
ATC6430M Mainboard                                 
Chapter 1 System Features
 
 
7
1-3-7  Ultra DMA 66 Cable (optional) 
    Ultra DMA 66 cable (40-pin connector & 80-line cable) is packaged while utilizing 
FW82801AA chip which supports both UDMA 33 & UDMA 66 on the mainboard. In 
other words, Ultra DMA 33 cable is only used with FW82801AB chip   And the Ultra 
DMA 66 color coded connectors  are shown as bellow: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1-3-8  Wake-On-LAN  
 
The remote Wake-On-LAN (WOL) mode of operation is a mechanism that uses 
Advanced Micro Device Magic Packet technology to power on a sleeping workstation 
on the network. This mechanism is accomplished when the LAN card receives a 
specific packet of information, called a Magic Packet, addressed to the node on the 
network. For additional protection, Secure ON is an optional security feature that can 
be added to the Magic Packet that requires a password to power on the sleeping 
workstation. When LAN card is in remote Wake-On-LAN mode, main system power 
can be shut down leaving power only for the LAN card and auxiliary power 
recondition.   
 
The LAN card performs no network activities while in the remote Wake-On-LAN 
mode of operation. It only monitors the network for receipt of a Magic Packet. If a 
Magic Packet is addressed to the LAN card on the network, the LAN card wake up the 
system. If the Secure ON feature has been enabled, the password added to the Magic 
Packet is also verified prior to waking up the system.   
 
You should select two kinds of PCI Ethernet cards with WOL function. One is 
Intel  and the other is with PME signal supporting. And you can set  “PCI PME# 
Grey to Slave 
IDE Peripheral 
Blue to Mainboard 
Black to 
Master 
IDE Peripheral