Clarion DB568RUSB Benutzerhandbuch

English

DB568RUSB

MP3/WMA/USB Mode:

Main-1 display (Track No., play time) Main-

2 Display (Folder No., Track No.) Title

Display Clock Display Main-1 Display...

∗

Once selected, the preferred display becomes the

display default. When a function adjustment such

as volume is made, the screen will momentarily

switch to that functionʼs display, then revert back

to the preferred display several seconds after the

adjustment.

Switching the display

Press the [D] button to select the desired display.
Each time you press the [D] button, the display

switches in the following order:

Note: Be sure to read this chapter referring to the front diagrams of

chapter “2. CONTROLS” on page 5 (unfold).

6. OPERATIONS

CAUTION

Basic Operations

Be sure to lower the volume before switch-

ing off the unit power or the ignition key. The

unit remembers its last volume setting. If

you switch the power off with the volume up,

when you switch the power back on, the sud-

den loud volume may hurt your hearing and

damage the unit.

Turning on/off the power

Note:

Be careful about using this unit for a long time

without running the engine. If you drain the carʼs

battery too much, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [SRC] button.
2. The illumination and display on the unit light

up. The unit automatically remembers its last

Operation mode and will automatically switch

to display that mode.

3. Press and hold the [

SRC] button for 1 second

or longer to turn off the power for the unit.

Selecting a mode

1. Press the [SRC] button to change the Opera-

tion mode.

2. Each time you press the [

SRC] button, the Op-

eration mode changes in the following order:

Radio mode CD/MP3/WMA mode

(USB mode) AUX mode Radio

mode...

Notes:

If the CD mode is selected when no disc is inserted,

the display shows “NO DISC”.

If no USB drive is inserted, USB mode will not be

displayed.

Radio/CD Mode:

Main display Clock display Main display

Adjusting the volume

Turning the [ROTARY] knob clockwise increases

the volume; turning it counterclockwise decreas-

es the volume.

∗

The volume level is from 0 (minimum) to 33 (maxi-

mum).

Audio mode adjustments

1. Press the [

A-M] button to select the Adjustment

mode. The mode switches as follows each time

the [A-M] button is pressed:

BASS TREB BAL FAD Previous

mode

2. Turning the [

ROTARY] knob to adjust the

selected Audio mode.

  BASS (Bass)  : Adjustment range : -7 to +7
  TREB (Treble) : Adjustment range : -7 to +7
  BAL (Balance) : Adjustment range : L13 to R13
  FAD (Fader)  : Adjustment range : F12 to R12

∗

The display returns to the previous mode 7

seconds after the adjustment.

Note:

Bass and Treble can only be adjusted when the

“Z-Enhancer” is off.