Nilfisk Alto 05230F Benutzerhandbuch

 Operator's Manual - 

How to Clean a Very Dirty Floor
To clean a very dirty fl oor, follow this procedure:
1.  Apply solution to the fl oor.
2.  Do not lower the squeegee.
3.  Do not activate the vacuum motor.
4.  Lower the brushes and scrub the fl oor.
5.  Leave the solution on the fl oor long enough for the solution to begin 

cleaning the fl oor.

6. Scrub 

the 

fl oor again with additional solution, picking up all the solution 

with the squeegee

Maintenance and repairs must be done by authorized personnel only.

Always empty the solution tank and recovery tank before doing any 
maintenance.

Keep all fasteners tight.

These Maintenance Procedures Must Be Done Every Day
Keep the machine clean, it will need fewer repairs and have longer life.
Do These Procedures When You Begin Your Work Period
1.  Turn off key switch.
2.  Unplug charger from AC outlet and wrap cord around bracket at rear of 

machine.

3.  Make sure the recovery tank lid is on correctly (see fi gure #20).
4.  Make sure the Screen fi lter over the vacuum motor is clean and in position 

(see fi gure #20).

5.  Make sure the valve on the recovery drain hose is clean.  Tightly close the 

valve.  

6.  Make sure brush housings and skirts are in position on the brush head. 
7.  Make sure the brushes are in position and installed correctly
8.  Check the installation of the squeegee and  squeegee hose.