SVAT Electronics CLEARVU11 Benutzerhandbuch

now you can see

CLEARVU11

44

In this example a D-Link D1-604 router was used. The steps for your router may be similar to the following steps.

These instructions have also been created without a firewall in place. If you have a firewall, please consult a computer 

technician or your network administrator.

You need to configure the router to forward the port numbers that the DVR uses. This will allow a computer over the internet 

to properly communicate with the DVR. The CLEARVU11 by default uses ports 67, 68, 80. All 3 ports need to be configured.

1.  Open  your  web  browser.  Enter  the  ROUTER  IP 

address  (default  gateway)  in  the  address  bar  and 

press ENTER.

2.  Enter  the  user  name “admin”.  Leave  the  password 

blank  followed  by  pressing  the  OK  button  (unless 

you have set up a user name and password for your 

router).

                          

   In this situation, our router username is “admin” and the password is blank. Your router’s default username and 

password can be found by visiting 

   www.portfoward.com and following the steps outlined in “Configuring Your Router.” 

  

   *If the default username and password are not working, contact your network administrator (or the person who       

  configured your router.)

   * It is necessary to log on to your router to configure the port forwarding and access your DVR remotely.

        3. Select the Advanced tab.