SVAT Electronics CV501 - 16CH Benutzerhandbuch

There are four levels of record quality you can choose from, and it is adjustable per camera if recording with 720 x 240 resolution. If using 360 x 240 
resolution, cameras are adjusted in pairs (1 & 2, 3 & 4, 5 & 6 etc...):

1.  Low
2.  Medium
3.  High
4.  Best

1.  Highlight the record quality option and click  

  to change the record quality.

2.  Use the mouse wheel or directional keys to change the cameras record quality setting.
3.  Press ENTER or Click the   

 

  to save changes and exit to Record Setup menu.

4.  Press Menu or Click  

 to exit the Record Setup Menu.

You can set your DVR to record based on a preset schedule you have created or to manually record when you desire. By default, the schedule is set to 
record 24/7 and will automatically start recording when powered up. You have a choice to configure up to 5 recording schedules. Only one recording 
schedule can be active at any given time. 

In the record mode area, use the mouse wheel or directional buttons to scroll through various recording modes: Schedule 1, Schedule 2, Schedule 3, 
Schedule 4, Schedule 5, or manual. The schedule that is displayed on the Record Setup Screen will be the active recording schedule.

See the directions on how to setup a schedule in the Schedule setup section.

You can set the DVR to record with higher or lower picture quality when 

motion/alarms are triggered.  The instructions are the same as above for 

adjusting normal record quality when adjusting alarm record quality. There 

are four levels of record quality you can choose from for when the alarm the 

is triggered, each quality is adjustable per camera.

1.  Low
2.  Medium
3.  High
4.   Best