Panasonic KX-TCD420AL Benutzerhandbuch

34

When Automatic Base Unit Access is selected, if you move outside of the radio range of 
the current base unit the handset automatically searches for other registered bases.
When a specified base unit is selected, the handset will access that base unit only. Calls 
(both incoming and outgoing) can be conducted only via the selected base unit, even if 
the radio cells overlap with neighbouring base units.

• To exit the operation, press 

 any time.

• Even if "AUTO" is selected, it is cancelled when the handset is registered to the other 

base unit.

Operating Additional Base Units: You can register and operate your handset with up 
to 4 base units. Each base unit forms 1 radio cell. If the individual bases are linked to the 
same telephone line then you can extend the operating range of the system by 
positioning the bases so that the two radio cells overlap. If the handset is set to AUTO 
base selection, then in standby mode the handset will automatically swap to the second 
base if the range on the first base is exceeded. It is not possible to transfer calls between 
bases (only between handsets linked to the same base unit).

Search/Select 
"AUTO"

 or specific

base unit number.

Press MENU.

Search/Select 
"SELECT BS"

.

Search/Select 
"SETTING HS"

.

 1

 

 2

 3

 5

 4

E.g.
Additional
handsets
(KX-A142AL)
registered with
2 base units.

TCD420AL_e.book  Page 34  Tuesday, July 1, 2003  11:16 AM