Panasonic KX-TG2258S Benutzerhandbuch

 

“

 

No link to base. Place 

on cradle and try 

again.

 

” is displayed and an 

alarm tone sounds.

• You are too far from the base unit. Walk 

closer and try again.

• Place the handset on the base unit and try 

again.

• Plug in the AC adaptor.
• Raise the base unit antenna.

Static, sound cuts in/out, 
fades. Interference from other 
electrical units.

• Move the handset and the base unit away 

from other electrical appliances (p. 3).

• Walk closer to the base unit.
• Raise the base unit antenna.
• Select a clearer channel (p. 23,38).

The handset and/or base unit 
does not ring.

• The ringer volume is set to OFF. Set to HIGH, 

MEDIUM or LOW (p. 17).

• When the handset is on the base unit, the 

handset does not ring. Only the base unit 
rings when receiving a call.

The handset display is blank.

• Charge the battery fully (p. 8).

You cannot program function 
items.

• Programming is not possible while the unit is 

being used.

• Do not pause for over 60 seconds while 

programming.

• Walk closer to the base unit.

While programming or 
searching, the unit starts to 
ring and stops the program/
search.

• A call is coming in. To answer the call, press 

 

, 

 

 or 

 

. Start again from 

the beginning after hanging up.

You cannot make a call with 
the handset.

• Your handset is in remote operation mode 

(p. 44). Exit by pressing 

 

.

You cannot redial.

• If the last number dialed was more than 

32 digits long, the number will not be redialed 
correctly.