Panasonic NV-DS50A Benutzerhandbuch
38
CARD Mode
Using a Card
A Card can be used to record still pictures.
≥Use genuine card only.
≥Use genuine card only.
ª Inserting a Card
Before inserting a Card, be sure to turn off the Movie Camera.
1
Slide the [OPEN] Lever and open the Card Slot
Cover.
Cover.
2
Insert the Card in the direction as shown in the
illustration
illustration
1
.
3
Close the Card Slot Cover securely.
Removing the Card
Open the Card Slot Cover and press the centre of the Card and then
pull it straight out.
≥After removing the Card, close the Card Slot Cover.
pull it straight out.
≥After removing the Card, close the Card Slot Cover.
≥The SD Memory Card has a write protection switch on it.
2
If the
switch is moved to the [LOCK] side, you cannot write to or format
the Card. If it is moved back, you can.
the Card. If it is moved back, you can.
ª [ACCESS] Lamp 3
While the Movie Camera is making an access to the Card (reading,
recording, playback, erasing, moving of images), the [ACCESS]
recording, playback, erasing, moving of images), the [ACCESS]
Lamp lights up and the [PLEASE WAIT] Indication
4
appears.
≥While the [ACCESS] Lamp is on, never attempt to open the Card
Compartment, to pull out the Card or to turn off the Movie Camera.
Such actions will damage the Card, cause loss of recorded data
and cause the Movie Camera to malfunction.
Such actions will damage the Card, cause loss of recorded data
and cause the Movie Camera to malfunction.
2
1
ACCESS
OPEN
2
1
PLEASE WAIT
4
3
A-EngText.fm 38 ページ ２００２年２月１日 金曜日 午後１時１１分