Panasonic AG-3DP1G Benutzerhandbuch

34

Chapter

3

Recording

and

Pla
ybac

k

For shooting, follow the steps below.

UsetheNDFILTER

buttonstoselecta

filteraccordingtoambientlightconditions.



Whenthewhitebalanceissaved:

•  Position the WHITE BAL switch to A or B.



Whenthewhiteorblackbalanceisnotsaved

andyouhavenotimetoadjustthewhite

balance:

• Position the WHITE BAL switch to PRST.
•  The color temperature can be set to 3200 K or 

5600 K.

For details, refer to [Adjusting the White Balance 
and Black Balance] (page 46).



Ifthewhitebalanceisadjustedonthespot:

•  Select a filter according to ambient light 

conditions. Then, position the WHITE BAL 
switch to A or B and shoot a white test subject 
so that it appears at the center of the screen. 
Then, follow the steps below to adjust the white 
balance.

1.   Turn the AUTO W/B BAL switch toward AWB 

to adjust the white balance. 

2.   Turn the AUTO W/B BAL switch toward ABB 

to adjust the black balance. 

3.   Turn the AUTO W/B BAL switch toward AWB 

to adjust the white balance again.

For directions on making adjustments, see 
[Adjusting the White Balance] (page 46) and 
[Adjusting the Black Balance] (page 47).

Pointthecameraatyoursubjectandadjustthe

convergencepoint,usingtheCONV.dial.

For details, refer to [Adjusting the Convergence 
Point] (page 54).

Pointthecameraatyoursubjecttoadjustthe

focus,andzoom.

Tousetheelectronicshutter,settheshutter

speedandshuttermode.

For more information, see [Setting the Electronic 
Shutter] (page 48).

PresstheRECbuttontostartrecording.

Tostoprecording,presstheRECbutton.





Pressing the REC button starts recording of video and 
sound on the P2 cards.
•  The 3D recording mode is set by factory default. The left-

lens (L) image is recorded on the P2 card in card slot L , 
and the right-lens (R) image on the P2 card in card slot R.

•  The video and audio (including additional information) 

recorded in one session is referred to as a clip.

RECbutton

RECbutton

