Panasonic AG-3DP1G Benutzerhandbuch

Chapter

Adjustments

and

Settings

for

Recording

Setting the Electronic Shutter

Setting the Shutter Mode and
Speed

PresstheSHUTTERswitchpositionedatOFF

towardsON.

SHUTTERswitch

PresstheSHUTTERswitchtowardsSEL.

Repeatthisswitchoveruntilthedesiredmodeor

speedappearsontheLCDmonitorandinthe

viewfinder.

• If all modes and speeds are available, the display

changes in the following order:

• The bracketed ( ) speeds cannot be selected

when VFR is on.



When SYSTEM MODE is set to 1080-59.94i or

720-59.94P
For0iand0Precording

(1/15) (1/30) 1/60

1/100

S/S

1/120 1/250

For30Precording

(1/15) 1/60 1/100

1/250

S/S

1/120

For4Precording

(1/12) 1/60 1/100

1/250

S/S

1/120



When SYSTEM MODE is set to 1080-50i or 720-

50P
For50iand50Precording

(1/12.5) (1/25) 1/50

1/60

1/250

S/S

1/120

For5Precording

(1/12.5) 1/50 1/60

1/250

S/S

1/120



NOTE

• In any electronic shutter mode, a slower shutter speed will

reduce camera sensitivity.

• In auto iris mode, a faster shutter speed will increase the

aperture and lower the depth of field.

• Changes in synchro scan and shutter speed settings may

cause screen flicker.

• Under fluorescent lighting and other discharge lighting

systems, horizontal stripes may appear on the screen.
Changing the shutter speed may correct this problem.

• A subject that is captured when moving quickly across the

field of view may appear distorted. This is due to the signal
read out format of the image sensor (MOS sensor) and is not
a malfunction.

• The red, blue and green dots that may appear on the screen

at low shutter speeds do not indicate a malfunction.