Panasonic HXWA2A Benutzerhandbuch
140
VQT4F46
3
Operate with the remote control for the TV.
1)
Press the button up, down, left, or right to select a scene or still
picture to be played back, and then press the button in the center to
set it.
picture to be played back, and then press the button in the center to
set it.
2)
Activate the operation icons that are displayed on TV screen with the
remote control for the TV.
remote control for the TV.
A Operation icons
B Display operation icons
C Cancel operation icons
B Display operation icons
C Cancel operation icons
∫ Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also
turns off.
Automatic input switching:
If you connect with an HDMI micro cable (
If you use the remote control for the TV to turn off the power, this unit also
turns off.
Automatic input switching:
If you connect with an HDMI micro cable (
/
) or an
HDMI mini cable (
) and then turn on this unit, the input channel
on the TV automatically switches to this unit’s screen. If the TV’s power is
in standby status, it will turn on automatically (if [Set] has been selected
for the TV’s [Power on link] setting).
≥ Depending on the HDMI terminal on the TV, the input channel may not
in standby status, it will turn on automatically (if [Set] has been selected
for the TV’s [Power on link] setting).
≥ Depending on the HDMI terminal on the TV, the input channel may not
switch automatically. In this case, use the remote control for the TV to
switch the input channel.
switch the input channel.
1)
2)
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 140 ページ ２０１２年２月１４日 火曜日 午後５時１０分