Panasonic HXWA2A Benutzerhandbuch
144
VQT4F46
1
Connect the unit to the recording equipment and
begin playback on the unit.
begin playback on the unit.
≥ If the unit is connected to a video device using an AV cable, the screen
of the unit will not display images when in playback mode. Check on
the TV screen instead.
the TV screen instead.
2
Start recording on the connected device.
≥ To stop recording (dubbing), stop playback on this unit after stopping
recording on the recorder.
≥ Even when [DISPLAY] is set to [OFF], the battery icon will be displayed
if the battery runs low. Be sure to use a battery which has been
charged sufficiently.
charged sufficiently.
≥ If the date and time display and function indication are not wanted,
cancel them before dubbing. (
l 71)
If the dubbed images are played back on a wide-screen TV, the
images may be stretched vertically.
In this case, refer to the operating instruction of the device you are
connecting to or read the operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
images may be stretched vertically.
In this case, refer to the operating instruction of the device you are
connecting to or read the operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
HX-WA20PPPCPU-VQT4F46_mst.book 144 ページ ２０１２年２月１４日 火曜日 午後５時１０分