Panasonic HXWA2A Benutzerhandbuch
156
VQT4F46
∫ To disconnect USB cable safely
Select the
icon in task tray displayed on the PC, and then click
[Eject Panasonic Camcorder].
≥ Depending on your PC’s settings, this icon may not be displayed.
≥ Depending on your PC’s settings, this icon may not be displayed.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
≥ When this unit is connected to a PC using a USB cable while the unit is
turned on, power is also supplied from the PC to this unit.
≥ When performing reading/writing between a PC and an SD card, be
aware that some SD card slots built into PCs and some SD card
readers are not compatible with the SDHC Memory Card or SDXC
Memory Card.
readers are not compatible with the SDHC Memory Card or SDXC
Memory Card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
Use as a card reader
Connect the unit to a PC and set the unit to card reader
mode. (
mode. (
l 155)
≥ The LCD monitor will turn off.
≥ The Smart wizard screen is automatically displayed when HD Writer
≥ The Smart wizard screen is automatically displayed when HD Writer
VE 2.0 is installed.
≥ This unit is automatically recognized as an external drive of the PC.
(
l 157)
≥ File is read from the SD card if one is inserted or the built-in memory if
no SD card is inserted.
≥ When you select an option other than [CARD READER], reconnect the
USB cable.
About the status indicator of the unit
≥ While the unit is connected to a PC, the status indicator lights up in
≥ While the unit is connected to a PC, the status indicator lights up in
green.
≥ While the unit is accessing the SD card or the built-in memory, the
status indicator illuminates in red. During access, do not disconnect
the USB cable or remove the battery.
the USB cable or remove the battery.
HX-WA20PPPCPU-VQT4F46_mst.book 156 ページ ２０１２年２月１４日 火曜日 午後５時１０分