Panasonic HXWA2A Benutzerhandbuch

Seite von 224
 
VQT4F46 
167
∫ Using Direct Mode
The files can be transferred directly from the Eye-Fi card to a smartphone 
or tablet without going through the access point when necessary setting 
is performed in a PC in advance.
≥ Install the software supplied with the Eye-Fi card on your PC, and 
configure the Direct Mode settings.
Select the menu.
≥ If any of the following operations is performed, the Direct Mode will be 
canceled.
j If you turn the unit off
j Closing the LCD monitor, sending the unit into standby mode.
j Starting motion picture or audio recording
The Direct Mode may be canceled by the Eye-Fi card for reasons other 
than the above.
≥ In Direct Mode, the economy mode function (
l 45) is disabled.
≥ When [TRANSFER] (
l 166) is set to [OFF], [START DIRECT MODE] 
cannot be selected.
∫ Selecting files to transfer
If you perform the required settings in advance on your PC, you can 
transfer selected files alone. For settings methods etc., please read the 
card operating instructions or consult the card manufacturer.
≥ Install the software supplied with the Eye-Fi card on your PC, and 
configure the selection transfer settings.
Select the menu.
≥ The settings method is the same as for the protect settings. (
l 131)
≥ For the files set for selected transfer, 
 is displayed on the 
thumbnail screen (1-file display).
≥ If you have not performed selected transfer settings on your PC, 
[PROTECT] is displayed and the selection transfer setting is disabled.
[MENU]:  
# [Eye-Fi] # [START DIRECT MODE]
[MENU]:  
# [TRANSFER/PROTECT]
3
1
HX-WA20PPPCPU-VQT4F46_mst.book  167 ページ  2012年2月14日 火曜日 午後5時10分