Northern Industrial Tools P5000 Benutzerhandbuch
92
Technical Notes
Attaching Converter Lenses
The optional WC-E67 wide-angle and TC-E3ED telephoto converter lenses
attach as described below (the illustrations show the WC-E67). See the con-
verter instruction manual for details.
The optional WC-E67 wide-angle and TC-E3ED telephoto converter lenses
attach as described below (the illustrations show the WC-E67). See the con-
verter instruction manual for details.
Rotate the mode dial to P, S, A, M, or T when using optional converter lenses. To
remove the converter, turn the camera off and perform steps 1–4 in reverse
order. Set the Converter option in the camera shooting menu (
remove the converter, turn the camera off and perform steps 1–4 in reverse
order. Set the Converter option in the camera shooting menu (
B 79) to None
when no converter is attached.
1
Remove the lens ring
Turn the camera off and remove the lens ring as
shown at right.
Turn the camera off and remove the lens ring as
shown at right.
2
Remove the rear cap from the converter lens
3
Attach the UR-E20 adapter ring
Attach the UR-E20 to the camera lens as shown
at right.
Attach the UR-E20 to the camera lens as shown
at right.
4
Attach the converter lens
Screw the converter lens into the UR-E20 as
shown at right.
Screw the converter lens into the UR-E20 as
shown at right.
5
Choose a Converter option
Rotate the mode dial to P, S, A, M, or T and select the appropriate setting for
the Converter option in the camera shooting menu (
Rotate the mode dial to P, S, A, M, or T and select the appropriate setting for
the Converter option in the camera shooting menu (
B 79).
6
Remove the lens cap
Remove the front cap from the converter lens.
Remove the front cap from the converter lens.