Sony CSS-TNA Handbuch
16-GB
Symptom
Your computer does not recognize the
camera
camera
Buttons on the Cyber-shot Station or
the remote control do not work, and no
operations can be performed
the remote control do not work, and no
operations can be performed
The connection between the printer
and the Cyber-shot Station cannot be
established
and the Cyber-shot Station cannot be
established
Unable to print still images
Unable to attach the camera on the
Cyber-shot Station
Cyber-shot Station
Cause/Solution
• The camera is turned off.
t Turn on the camera.
• You are not using the supplied USB cable.
t Use the supplied USB cable.
• The USB cable is not connected firmly.
t Disconnect both ends of the USB cable and
connect them again firmly. Make sure that the
camera is set to “USB Mode”.
camera is set to “USB Mode”.
• The camera is not placed on the Cyber-shot Station
correctly.
t Place the camera correctly.
• The USB jacks on your computer are connected to
other devices besides the keyboard, the mouse,
and the Cyber-shot Station.
and the Cyber-shot Station.
t Disconnect all devices except the keyboard, the
mouse, and the Cyber-shot Station from the
USB jacks.
USB jacks.
• The AC Adaptor is disconnected.
t Connect the AC Adaptor properly.
• The battery in the remote control is dead.
t Replace the battery with a new one.
• The printer may not be PictBridge-compliant.
t Ask the printer manufacturer whether your
printer is PictBridge-compliant or not.
• The printer is not set for the connection with the
camera.
t Make sure that the printer is turned on to
connect with the camera.
• The USB mode setting in “SET UP” is not
appropriate.
t Set the [USB connection] on the camera.
t For further details, refer to the operating
t For further details, refer to the operating
instructions supplied with the camera.
• The Cyber-shot Station is not connected to the
printer properly.
t Make sure that the Cyber-shot Station and the
printer is connected with the USB cable
properly.
properly.
• The camera is not placed on the Cyber-shot Station
correctly.
t Place the camera correctly.
• The printer is not turned on.
t Turn on the printer.
For further infomation, refer to the operating
instructions supplied with the printer.
instructions supplied with the printer.
*
Still images taken with other cameras and images
modified with a computer may not be printed.
modified with a computer may not be printed.
• The designated Adaptor plate is not attached to
the Cyber-shot Station.
t Attach the designated Adaptor plate to the
Cyber-shot Station.