Canon i470D Merkblatt

Carefully remove all items from the box.

i470D Series
Photo Printer

Documentation 

and Software Kit

Power Cord

i470D Series Print Head

Ink Tanks

BCI-24 Black 

BCI-24 Color

Paper Rest

Open the output tray, then open the front 
cover. The print head holder automatically 
moves to the center.

Press the Power button.

Plug the power cord into the back of the 
printer and connect the other end to a 
power outlet.

Remove all shipping tape from the front 
and sides of the printer. 

Write down the serial number located to 
the right of the print head. You will need 
this later to register the product.

Power

Lamp

Power

Button

Shipping
Tape

Serial number

Output Tray

Remove the black ink tank (BCI-24 Black)
from its package and pull off the orange 
protective cap.

NOTE: To avoid spilling ink, do not touch 
the bottom of the tank once you have 
removed the protective cap.

Insert the black ink tank into the slot on 
the right, then push in until the ink tank 
locks into place. 

Repeat the procedure for the color ink 
tank (BCI-24 Color), inserting it into the 
remaining slot.

Close the front cover, attach the paper rest 
and pull out the output tray.

Protective cap

Click

USB Cable

USB Port

IMPORTANT: Be sure printer is 
off before continuing, or the 
computer will attempt to install 
the printer driver before the 
printer is ready.

Connect one end of a USB cable (not 
included) to the computer, the other to 
the printer.

Turn the printer off.

Remove the print head from its package.

NOTE: Do not touch the electrical contacts
on the back and bottom of the print head.

Raise the gray lock lever on the printer.

Slide the print head into the holder until 
it is securely seated.

Do not press it down.

Lower the lever until it locks into place.

Remove the orange protective cap. 

Electrical

contacts

Tear at notch to open

1

2

3

4

1

5

4

3

1

2

1

2

3

4

1

2