Golden Technologies GP204 Benutzerhandbuch

Alante DX/LT Owner’s Manual                                                                                                                     Rev A_011811 

                                                                                                                                                      

Your Alante DX/LT™ is simple to operate. However, for your safety and the safety of others, 
Golden Technologies, Inc. recommends that you carefully read and understand the 
following operating instructions. We also recommend that you practice operating your 
Alante DX/LT™ in an area free of any obstacles. Once you have gained confidence in your 

ability to control your power chair, you will more easily be able to operate it in normal daily 
conditions.                                                                                                                                     

Before turning on the power of your Alante DX/LT™, take note of your environment and set 
your speed control accordingly. (See “Speed Control Buttons” Figure 9 on page 16) For 
indoor driving, we recommend that you select the lowest speed setting. For outdoor driving, 
we recommend that you select a speed setting at which you feel comfortable, safe, and in 

control of your power chair. Familiarize yourself with the features of your Alante DX/LT™ 
described below and follow the instructions to safely operate your power chair.                              

Push the on/off button to turn on the power to your Alante DX/LT™. See Figure 9 on page 
16. The 10 LEDs will flash once and a number of LEDs will remain depending on the state 
of the battery charge.                                                                                                                      

♦ The LED (Light Emitting Diode) array, that functions as the battery charge gauge, will 
light up. See “Battery Charging” on pages 33-34.                                                                            

Pressing the on/off button again will turn off the power to your Alante DX/LT ™.                           

The Speed Control Buttons                                                                                                    
These buttons provide you with a way to control the maximum speed of your Alante DX/LT.  

♦ Push the “Slow” button repeatedly to set your chair’s speed to the slowest setting 
(recommended for indoor operation). Slowest speed is indicated by one (1) lit LED section 
on the speed indicator scale.                                                                                                           
♦ Push the “Fast” button repeatedly to set your chair’s speed to its highest setting. Highest 

speed is indicated by five (5) lit LED sections on the speed indicator scale.                                     

NOTE: For your safety, the controller automatically sets the reverse speed, acceleration, 
and deceleration in proportion to the speed control setting. 

 
 

25