Spectralink E340 Benutzerhandbuch

SpectraLink Corporation 

Configuration and Administration—NetLink e340/i640 Wireless Telephone 

 

Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 

3.4 

Handset Modes 

Standby (on-hook) 
In the standby mode the handset is waiting for an incoming call or for the user to 
place an outgoing call. The extension number is shown on the display and there is no 
dial tone. In this mode, the handset is conserving battery power and wireless LAN 
bandwidth. 
When an incoming call occurs the handset will ring until the call is answered by 
pressing the 

Start

 

Call

 key or the 

End Call

 key is pressed to silence the ringing. 

Predial 
To place a call using predialing (cell phone dialing), dial the number while in standby 
mode and then press 

Start Call.

 This transitions the handset to active off-hook mode 

and the number is immediately called. 

Active (off-hook) 
To place a call, press the 

Start Call

 key. This transitions the Wireless Telephone to 

active off-hook mode. There is a dial tone, the Wireless Telephone is in 
communication with the PBX, and the display shows information as it is received 
from the PBX. The user may place a call or press the 

FCN

 or 

LINE

 key to access 

operations. 
The Wireless Telephone is also in the active mode when a call is received. 
When an incoming call occurs during an active call the handset will play the second 
line ringing sound until the call is answered, the caller hangs up, or the call transfers 
to voicemail. If 

End Call

 is pressed, the first call is terminated and the handset reverts 

to a full ring. 
The active modes utilize the most bandwidth and battery power. To conserve these 
resources, return the handset to the standby mode when a call is completed by 
pressing the 

End Call

 key. 

Active (on-hook) 
To transition from the standby mode to the active on-hook mode, press the 

MENU

 

key. In this mode, the handset displays the text display as seen on an idle 5220 IP 
phone, usually the date and time. There is no dial tone. The user may press the 

FCN

 

or 

LINE

 key to access all operations available from the active off-hook mode. 

When an incoming call occurs the handset will ring loudly until the call is answered 
or the 

 key is pressed. If an active key is pressed, the ring will convert to the 

second-line ringing sound. 
If there is no activity for 45 seconds, to conserve bandwidth and battery power the 
handset will return to the standby mode. 

PN: 72-1084-02-E.doc 

Page 14