JVC HR-V205EK Benutzerhandbuch

basic features

Return to Normal Screen

Press MENU twice.

Engage Timer Mode

You must now put the VCR into Timer Mode by pressing o otherwise no
recording will take place. The timer indicator and standby/record indicator light
on the display panel. To disengage the Timer Mode, press o again.

• If a cassette has not loaded when the VCR enters the Timer Mode, the timer

indicator blinks on the display panel.

Intelligent LP Recording

When you set the tape speed to

, the VCR automatically switches to LP mode

to allow complete recording if there is not enough tape to record the entire
programme while timer-recording in SP mode.
For example, recording a programme of 210 minutes in length onto a 180-
minute tape.

Approximately 150 minutes

Approximately 60 minutes

SP mode

LP mode

Total 210 minutes

NOTES:

• If you have programmed the VCR to timer-record 2 or more programmes, do

not use this function, but change the tape speed manually during timer
programming.

• There may be some noise and sound disturbance where the tape speed

switches from SP to LP mode on the tape.

• This function is not available during ITR (Instant Timer Recording), and will

not work properly with any tapes longer than E-180 or with some tapes of
shorter lengths.

HR-V205EK-EN/p31-36

2/13/03, 9:31 AM