GE VG4061 Benutzerhandbuch
CONNECTIONS
41
Things to Know Before Connecting
Components
Components
Protect Your Components from Power Surges
•
Connect all components before plugging any
power cords into the wall outlet.
power cords into the wall outlet.
•
Always turn off the TV and other components before
you connect or disconnect any cables.
you connect or disconnect any cables.
Position Cables Correctly to Avoid Audio Hum
or Interference
or Interference
•
Insert all cable plugs firmly into their jacks.
•
Place the audio/video cables to the sides of the TV’s
back panel instead of straight down the middle
after you connect your components.
back panel instead of straight down the middle
after you connect your components.
•
Try not to coil any twin-lead cables and keep them
away from the audio/video cables as much as
possible.
away from the audio/video cables as much as
possible.
•
Make sure all antennas and cables are properly
grounded. Refer to the Safety Tips sheet packed with
your unit.
grounded. Refer to the Safety Tips sheet packed with
your unit.
Protect Your Components from Overheating
•
Do not block ventilation holes in any of the
components. Arrange the components so that air
can circulate freely.
components. Arrange the components so that air
can circulate freely.
•
Do not stack components.
•
Allow adequate ventilation when placing your
components in a stand.
components in a stand.
•
Place an amplifier or satellite receiver on the top
shelf of the stand so heated air rising from it will not
flow around other components.
shelf of the stand so heated air rising from it will not
flow around other components.
7
➣
➣
SETTING UP THE VCR
2
FIRST THINGS FIRST
1
➣
RECORDING
3
VCR BASICS
4
7
➣
5
➣
OTHER FEATURES
7
6
CONNECTIONS
5
➣
PROGRAMMING THE
REMOTE
REMOTE
5