Panasonic AJ-P Benutzerhandbuch

32

25

SYSTEM FREQ

0000
0001

2

0002

2

0003

2

0004

59/60

50i/25P

2

23/24

2

25 (HD)

2

25 (SD)

For selecting the system frequency
0: The 59.94 Hz or 60 Hz system frequency is selected.
1: The 50 Hz or 25 PsF system frequency is selected.

At this setting, the 1080/25 PsF format signals can be recorded and played back
in the same way as with the 1080/50i format.

2: The 23.98 Hz or 24 Hz system frequency is selected.
3: The 25 Hz system frequency is selected.  However, black signals are output

from the SD SDI output and analog composite connectors.

4: The 25 Hz system frequency is selected.  However, black signals are output

from the HD SDI output and analog component connectors.

<Note>
Merely changing this item’s setting only causes the menu item to flash, and the
setting itself is not reflected in the unit.  To reflect a new setting in the unit, turn off
the power and then turn it back on.

26

HD SYS H ADV

0000

0001

0H

90H

For selecting the output whose HD output phase is to be advanced by 90H in
relation to the SD output.
0: Both the HD and SD signals are output in phase with the HD and SD REF

output signals.

1: The HD signals are output at a phase advanced by 90H from the SD output

signals.
When the SD REF signal is input, the REF input and SD output are in-phase,
and when the HD REF signal is input, the REF input and HD output are in-
phase.

O

The audio signals and TC signal are output in phase with the HD output.

O

With the 720p format, there is a phase difference of 120H between them.

O

This item’s setting is fixed to “0H” when “1394” is selected as the menu item
No.600 [VIDEO IN SEL] setting or when an SD format tape is being played
back.

2

This appears when the AJ-YA120AG (optional accessory) has been installed.