Niles Audio LZR510 Benutzerhandbuch

I

N T E L L I

P

A D

®

C i

T

O U C H

S

C R E E N

K

E Y P A D

1. Touch any of the displayed Master Keys twice. If needed, touch More once to view the other

set of Master Keys. The Master Key Edit screen will appear (as shown in the following example):

• For reference, the Master Key Edit screen shows the command name (e.g., MK3) for the

selected Master Key.

• To show a selected Master Key during normal TS-1 operation, touch Show Key once. 

A check mark will appear in the check box.

• To hide a selected Master Key during normal TS-1 operation, touch Show Key once. The

check mark will disappear from the check box.

• To edit the label for the selected Master Key, touch Edit once. A keyboard will appear. Use

a PDA stylus to type in a desired label. When finished, touch ENTER once to save your entry
and return to the Master Key Edit screen. The highlighted Label box will display your entry.

• To edit the type of control screens that will appear for the selected Master Key, touch ▲

or ▼ one or more times to scroll and locate a desired set of control screens. The high-
lighted Screens box will display your selection. 

2. Touch OK once to save the settings. The Edit Configuration screen will appear again.

3. To save all Edit Configuration settings, touch Exit once. The Manual Programming screen

will appear again.

4.  If finished with all manual programming, touch OK once to exit the program. Otherwise,

continue with other program options.

2. Select the desired action as follows:

• To continue with auto configuration, touch Yes once. The TS-1 will reconfigure itself and

the Manual Programming screen will appear again. 

• To cancel auto configuration, touch No once. The action will be cancelled and the Manual

Programming screen will appear again. 

3.  If finished with all manual programming, touch OK once to exit the program. Otherwise,

continue with other program options.

Included in the TS-1’s built-in utility program is an Edit Configuration module. It allows the installer
to modify and customize control screen templates containing source-component function keys for
audio and video sources. 

1. On the Manual Programming screen (see page 34, step 2), touch Edit Configuration once.

The Edit Configuration screen will appear:

2. At this point, the installer can choose to configure Master Keys (see next page) or Function

Keys (see page 38). 

I

N T E L L I

P

A D

®

C i

T

O U C H

S

C R E E N

K

E Y P A D