Samsung SV-665B Benutzerhandbuch

OK

REC

      MENU

 SPEED          DUB        TV/VCR       TIMER

This function enables you to record up to nine hours (LP) of
programmes.
Your VCR stops automatically after the requested length of time.

Switch on the television.

To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).

Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:

The VCR is switched on automatically.

Select:

◆

The station to be recorded using the PROG/TRK (

œ

or 

❷

) /

PROG (

œ

or 

❷

) buttons

or

◆

The AV1, AV2  or AUX 

★

(SV-665B/SV-661B/SV-662B/

SV-651I only) source using the INPUT button for a satellite
tuner or external video source

Result:

The channel number is displayed and the programme
can be seen on the television.

Select the recording speed by pressing the SPEED button as
many times as required (see page 22).

Hold the REC button down for a while to start recording.
Result:

The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 36).

Press the REC button several times to increase the recording time
in:

◆

30-minute intervals up to four hours

◆

1-hour intervals up to nine hours (LP)

Result:

The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.

If you wish to cancel the recording before the end, press 
VCR STANDBY/ON (STANDBY/ON).

☛

If the end of the tape is reached while recording:

◆

The recording stops

◆

The VCR automatically turns off

    VCR                INPUT

REPEAT

         PROG/TRK

DISP./

T

         IPC                INPUT

REPEAT

K          PROG

DISPLA

★

★

Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.

If you wish to protect a cassette, break off the tab using a small
screwdriver.

To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.

 SPEED          DUB        TV/VCR       TIMER

TRK          PROG

REC

      MENU

Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 18 and 19.

Switch on the television.

To monitor the programme being recorded, select the television 
channel reserved for use with your VCR (or the AV input if used).

Insert the cassette on which the programme is to be recorded, 
with the window visible and the safety tab intact or the opening 
covered with adhesive tape.
Result:

The VCR is switched on automatically.

Select:

◆

The station to be recorded using the PROG/TRK (

œ

or 

❷

) /

PROG (

œ

or 

❷

) buttons

or

◆

The AV1, AV2  or AUX 

★

(SV-665B/SV-661B/SV-662B/

SV-661I only) source using the INPUT button for a satellite
tuner or external video source

Result:

The station number is displayed and the programme
can be seen on the television.

Select the recording speed by pressing the SPEED button as 
many times as required (see page 22).

Hold REC down for a while to start recording.
Result:

The record indicator appears on the television and VCR
display. An index is recorded on the tape (see page 36).

To stop recording, press 

■

once.

➢

◆ If your VCR ejects the cassette when you start

recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.

◆ If you reach the end of the tape while recording, the

cassette rewinds automatically.

    VCR                INPUT

REPEAT

         PROG/TRK

DISP./

T

         IPC                INPUT

REPEAT

K          PROG

DISPLA

★

★