Cobalt Networks 9032 Benutzerhandbuch

••••

Use the following steps to install the card in the openGear

TM

 8310 frame:

1.  Refer to the Owner’s Manual of the openGear

TM

 8310 frame to ensure that the frame

is properly installed according to instructions.

 

Heat and power distribution requirements within a frame may dictate
specific slot placement of cards.  Cards with many heat-producing
components should be arranged to avoid areas of excess heat build-up,
particularly in frames using convection cooling.

2.  After selecting the desired frame installation slot, hold the card by the edges and

carefully align the card edges with the slots in the frame.  Then, fully insert the card
into the frame until the rear connection plugs are properly seated on the midplane and
rear modules.

This completes the procedure for installing the card in the openGear

TM

 8310 frame.

 

This manual is written for software release number 2.0.

 

To view the current software release number of your 9032 check the information submenu on the front
edge controls or the card info menu in DashBoard.

 

To upgrade your 9032 software, go to the download page at 

www.cobaltdigital.com

 to download the

latest release, and upload the file through DashBoard (see DashBoard user manual, 3-5).