Sterling 882.000254.00 Benutzerhandbuch
7/50D Plus or 7/50D Controller
Chapter 3: Installation
44
3. Touch Setup at the Station n Operator screen.
The Station n Setup screen appears:
(7/50D Plus shown)
Note: Touching Help in the lower right of this screen gives you a menu of
online help for the choices in this screen. Touching Return at the
help menu brings you back to the Station n Setup screen.
help menu brings you back to the Station n Setup screen.
4. Adjust settings as required. Touching any box that appears in red (for “disabled”)
toggles it to green (for “enabled”), and vice versa (except that RPV has three settings,
as described below). Touching any box that appears in light gray gives you a keypad
to enter a new value.
as described below). Touching any box that appears in light gray gives you a keypad
to enter a new value.
Keypad entry works as with many ATM machines: the first digit you enter initially
appears in the rightmost column and moves to the left as you enter more digits. You
do not need to use the decimal point. Use
appears in the rightmost column and moves to the left as you enter more digits. You
do not need to use the decimal point. Use
← to erase any mistakes. Use ↵ to enter the
value. The keypad disappears and the Station n Setup screen shows the new value in
the selected gray box.
the selected gray box.
Touching RESET TO DEFAULTS in the lower right of the screen changes all
settings for this station back to their factory defaults.
settings for this station back to their factory defaults.
See pp. 73–77 for details on the options and their default settings.