Sterling 882.000254.00 Benutzerhandbuch
7/50D Plus or 7/50D Controller
Chapter 3: Installation
53
To change the duration of a password:
1. At the System Setup screen, touch Operator Password Duration or Setup
Password Duration, as appropriate.
A keypad pops up, with an entry of 0.
2. Enter the number of minutes (range: 5–99). Use
← to erase any mistakes. Use ↵ to
enter the value.
The keypad disappears and the new setting appears under Operator (or Setup)
Password Duration.
Password Duration.
3-6 Initial Startup
Once you have finished all the setup described above, you are ready to start the system. To do
so:
so:
1. At any screen, touch Stations on the right-hand side of the screen.
The Station Summary screen appears.
2. For each station that you want to use, briefly touch its icon.
The icon turns blue, indicating that the station is ready or yellow, indicating that the
station needs material.
station needs material.
3. Touch Pumps.
The Pump Summary screen appears.
4. For each pump that you want to use, briefly touch its icon.
The icon turns blue, indicating that the pump is ready.
5. Touch Push to Start System in the lower right-hand corner of the screen.
The system starts. If any alarm messages appear on the top of the screen, see p. 71.