Panasonic LSQT1060 Benutzerhandbuch

Information

Pull on both ends of the Front Cover

with your

fingertips to remove it.

(1) Turn the Lamp Cover Lock/Open Knob to the

left.

(2) Pull the Lamp Cover out and down to open it.

Lamp Cover
Lock/Open Knob

Lamp Cover

(1) Turn the Lamp Unit Lock/Open Knob to the

left.

(2) Grasp the Lamp Unit Lock/Open Knob and

slowly remove the Lamp Unit as shown.

Lamp Unit
Lock/Open Knob

• The Lamp Unit is hot right after use and may cause

burns if touched.

• Please allow the Lamp Unit to cool before handling or

replacing it.

(1) Insert the new Lamp Unit being careful of the

insertion direction.

• Press on the arrow mark to confirm proper

insertion.

(2) Turn the Lamp Unit Lock/Open Knob to the

right until it clicks.

Notes:

• Properly dispose of the old lamp. Please see page 64.
• Secure the Lamp Unit and Lamp Unit housing door. If

they are not secured, a protective circuit will not allow the
lamp to turn on.

• At this point, confirm that the Lamp Unit will not come out

by pulling on the Lamp Unit Lock/Open Knob.

After lamp replacement, you must reset the lamp
time. Refer to the instructions enclosed with the
lamp unit (Part No.: TY-LA1001).

(1)

Lamp Unit

(2)

(1)

(2)

(1)

(2)

(1) Close the Lamp Cover.
(2) Turn the Lamp Cover Lock/Open Knob to the

right.

Lamp Cover
Lock/Open Knob

Lamp Cover

(2)

(1)

CAUTION

Lamp Unit
Lock/Open Knob

Lamp Unit

Front Cover

Note:

• Remove Front Cover after Front Door (p. 10) is opened.

Be sure that the hook on the Front Cover is
securely fastened to the unit as shown.

Front Cover

Hook