Cortelco 2740 Benutzerhandbuch

Seite von 42
31
a.
Press HOLD.
b.
Enter “*” or “#”.
i.
* ... to turn Toll Restriction ON.
ii.
# ... to turn Toll Restriction OFF
c.
Enter the 4 digit toll restriction access code which was set at Station #01. If no code was set, the
access code is the initial number set at the factory, which is “1234”.
Note: Turning Toll Restriction ON at a telephone will have no effect unless restrictions have been stored at
that telephone.
5.15
Timer
5.15.1 Elapsed Call Time
The display automatically shows the elapsed time during a call.
5.15.2 Timer Reset
Press the up arrow (^)button, which is found directly below the display.
5.15.3 Elapsed Call Time (Previous Calls)
While the phone is on-hook and idle, press REDIAL. The display will show the elapsed time of the previ-
ous call, along with its time and date.  Use the right arrow button under the display to view the lengths of the
previous five calls, along with their times and dates.
5.16
Headset
Your 2740 is headset-ready. It comes equipped with a 2.5mm headset jack, and a built-in headset amplifier,
along with a dedicated HEADSET button.  To use this feature, plug a telephone headset with a 2.5 millime-
ter plug into the headset jack. There is no need to buy a headset with a separate amplifier.
You can use your headset to make or answer an outside call, an intercom call or a page. Simply press
HEADSET instead of lifting the handset. During a call, you may switch back and forth between handset,
headset and/or speakerphone as much as you like.
If you wish to override automatic line selection, press the desired LINE button instead of pressing HEAD-
SET
, and you will be connected to that line on the speakerphone. Then press HEADSET to toggle to the
headset.
Press HEADSET again to hang up.
5.17
Directory Card
Remove the directory card and write down the names or telephone numbers associated with memory
locations.
5.18
Memory Dial
Press the memory button where the desired telephone number is stored.  The speakerphone turns on
automatically, and the number is dialed out. You may lift the handset or press HEADSET to switch to a
handset or headset call at any time.