AT&T G3 Benutzerhandbuch
Issue 2 April 1996
5-29
Planning Connectivity
To Validate Dial Strings
To Validate Dial Strings
To Validate Dial Strings
Introduction
You must verify that the dial string in the /etc/uucp/Dialers file is
valid for your data communications hardware. If it is not, you need
to edit the Dialers file.
valid for your data communications hardware. If it is not, you need
to edit the Dialers file.
When to use
Validate the dial string after you have connected your data
communications hardware to your Proxy Agent PC.
communications hardware to your Proxy Agent PC.
Dial strings
The following table shows the valid dial string for your
communications hardware. The dial string in the Dialers file is on
one continuous line.
communications hardware. The dial string in the Dialers file is on
one continuous line.
Communications
hardware
hardware
Dial string
Modem
hayes =,-, ""
\M\dAT&FE1V1X4Q0&C1&D2S7=255S0=
0\r\c OK \EATDT\T\r\c CONNECT \m
Use this dial string if you have a Serial I/O
ports card.
ports card.
Data Module:
AT&T 7400B
AT&T 7400B
Data Module
(PDM or MPDM)
or ADU
(PDM or MPDM)
or ADU
pdm =+ "" \M\K\p DIAL: \T
ANSWERED \p\c\m