AT&T G3 Benutzerhandbuch
Issue 2 April 1996
3-13
UnixWare Installation
To Configure the Ethernet Interface
To Configure the Ethernet Interface
To Configure the
Ethernet Interface
Ethernet Interface
Introduction
You configure the Ethernet interface for the Proxy Agent when you
set the ifconfig options in the UNIX system.
set the ifconfig options in the UNIX system.
When to use
Configure the Ethernet interface after you set the system name for
the Proxy Agent PC.
the Proxy Agent PC.
Materials
needed
needed
You need the following information to configure the Ethernet
interface:
interface:
■
The IP address for the Proxy Agent PC.
■
The system name as it appears on the PA001 form.
■
Your network’s configuration, including the netmask for your
local network. (See your network administrator if you need
help.)
local network. (See your network administrator if you need
help.)
UNIX
commands
commands
Use the following steps to configure the Ethernet interface.
Command
Description
ifconfig
Assigns an address to a network interface and
configures the interface’s parameters.
configures the interface’s parameters.
netmask
Determines which part of your network address
is used as a network ID and which part is used
as the Proxy Agent ID.
is used as a network ID and which part is used
as the Proxy Agent ID.