Panasonic KX-TG9321 Benutzerhandbuch

41

If you still have difficulties after following the instructions in this section, disconnect 
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the 
batteries from the handset, and then insert the batteries into the handset again.

The handset does not turn 
on even after installing 
charged batteries.

L

Place the handset on the base unit or charger to 
turn on the handset.

The unit does not work.

L

Make sure the batteries are installed correctly 
(page 10).

L

Fully charge the batteries (page 10).

L

Check the connections (page 8).

L

Unplug the base unit’s AC adaptor to reset the 
unit. Reconnect the adaptor and try again.

L

The handset has not been registered to the base 
unit. Register the handset (page 29).

I cannot hear a dial tone.

L

The base unit’s AC adaptor or telephone line cord 
is not connected. Check the connections.

L

If you are using a splitter to connect the unit, 
remove the splitter and connect the unit to the wall 
jack directly. If the unit operates properly, check 
the splitter.

L

Disconnect the base unit from the telephone line 
and connect the line to a known working 
telephone. If the working telephone operates 
properly, contact our service personnel to have the 
unit repaired. If the working telephone does not 
operate properly, contact your service provider/
telephone company.

The indicator on the base 
unit flashes.

L

New voice mail messages have been recorded. 
Listen to the new voice mail messages (page 34).

The display is in a 
language I cannot read.

L

Change the display language (page 13).

TG9321(e).book  Page 41  Friday, May 28, 2010  4:34 PM