DISH Network 612 Benutzerhandbuch

The YP

 connections provide high-quality video to your HDTV or HD monitor. Use 

these connections if your TV does not have an HDMI connection.

1

Connect component video cables to the YP

 (component) connections on the receiver. 

Connect the other end of the component video cables to the YPbPr (component) connec-
tions on the TV.

2

Connect audio (red and white) RCA-type cables between the receiver’s Audio Outputs 
and TV’s audio inputs.

3

Turn on your receiver and TV. Change your TV to the correct input or source. Consult your 
HDTV user’s guide for assistance.

4

If you do not see a picture, refer to No Picture on the TV, below.

5

Turn up the volume on your HDTV and confirm you have sound. 

6

Refer to Setting Up to Display in HD on page 88, to adjust the receiver’s HD display 
settings to match your TV.

This section helps you display a picture on your TV if you were not able to using the 
previous sections.

1

Connect RCA-type cables between the receiver’s C

 (RCA-type) video output 

and your TV’s Composite (RCA-type) input. 

2

Verify the receiver and the TV are on.

3

Make sure the TV is set to the correct input for the RCA-type connection. Refer to your 
HDTV user’s guide for assistance.

4

Change the HDTV settings to match your TV’s display settings as described on page 88.

5

Change the TV to display from the HD input you connected in the previous sections. If you 
can see a picture, you are finished.

6

Repeat steps 4 and 5 until the TV displays video from the receiver.

1

3

4

2