Bose 18 Benutzerhandbuch

Each LIFESTYLE

®

 remote control uses a system of matching house codes to communicate 

with its corresponding media center. If commands given from your remote ever conflict with 
those of another nearby LIFESTYLE

®

 system, you can easily set a new house code for your 

system and its remote control(s) by doing the following:

1.

Open the remote control battery cover and locate the miniature switches (Figure 15).

2.

Move one or more of switches 1, 2, 3, or 4 in the opposite direction from its current 

 

setting. Use a paper clip, ball point pen, or similar object.

3.

Replace the battery cover.

4.

Lift the media center door and press the All Off button.

5.

Press and hold the Store key. Your current house code will appear in the media center 
display window in the form of four rectangles which represent the positions of switches 1 
through 4:

6.

While holding the Store key, press any key on the remote control.  
The display will change to show the new house code to confirm recognition of the 

 

new code:

7.

Release the Store key. The system remains off.

8.

If you have additional remote controls, change the switches to match those of the first 
remote control. It is not necessary to repeat steps 4-8.

Current house code = 0 0 0 0 (Switches 1 - 4 down.)

New house code = 1 0 1 0

(Switch 1 up, 2 down, 3 up, and 4 down.)

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

House code switches (1-4).

Shown as set at the factory: 
all switches down.