Toshiba 32W300P Benutzerhandbuch
21
Brightness, Contrast, Colour and Sharpness/DNR
Notes:
• To reset BRIGHTNESS,
• To reset BRIGHTNESS,
CONTRAST, COLOUR, TINT and
SHARPNESS to the factory preset
values, select RESET in step 1 then
press
SHARPNESS to the factory preset
values, select RESET in step 1 then
press
or
.
• In HDMI or COMPONENT mode, the
“DNR” option cannot be selected.
Brightness, Contrast, Colour and Sharpness
1
Select BRIGHTNESS. Then press
or
to adjust the
brightness.
If you wish to set the contrast, colour, tint, or
sharpness, press
sharpness, press
or
to select CONTRAST,
COLOUR, TINT, or SHARPNESS. These can all be
adjusted in the same way.
adjusted in the same way.
The “TINT” option can be selected if an NTSC 3.58MHz or
NTSC 4.43MHz signal is input through one of the AV
sockets, and NTSC or AUTO has been selected for the AV
COLOUR option (see P.35).
NTSC 4.43MHz signal is input through one of the AV
sockets, and NTSC or AUTO has been selected for the AV
COLOUR option (see P.35).
2
Press EXIT to return to the normal screen.
DNR
DNR (Digital Noise Reduction) can reduce the roughness of
the picture.
the picture.
1
Select DNR. Then press
or
to select ON or OFF.
2
Press EXIT to return to the normal screen.
: S E L E C T
: A D J U S T
: R E T U R N
: R E T U R N
M E N U
B R I G H T N E S S
2 5
C O N T R A S T
2 5
C O L O U R
2 5
T I N T
0
S H A R P N E S S
2 5
D N R
O F F
: E N D
E X I T
: S E L E C T
: A D J U S T
: R E T U R N
: R E T U R N
M E N U
B R I G H T N E S S
2 5
C O N T R A S T
2 5
C O L O U R
2 5
T I N T
0
S H A R P N E S S
2 5
D N R
O N /
O F F
: E N D
E X I T
30E2825A_En_P18-24
1/15/07, 8:26 PM
21