Technicolor - Thomson EFC031 Benutzerhandbuch

Channel set-up

Naming or renaming channels

The Select channel line is selected.
Display the number of the channel whose name you want to change using the PR+/PR- buttons.
The relevant channel appears. Select the Channel name option and press the

button to place the cursor on the first

character.
Using the

buttons, select a character from the list, which includes letters from the alphabet, numbers between 0 and

9, the characters +,. and space.
Go on to the next character or back to the previous character using the

buttons and start the procedure again.

Press OK to confirm. Names can have a maximum of six characters.

Press EXIT to close the menu.

Note:You may subsequently return to ORGANISER menu:
Display the OVERVIEW menu by pressing the MENU button.
Select the Installation option and press OK to confirm.
Select the Organiser option from the INSTALLATION menu and press OK to confirm.

Manual channel set-up

Follow the procedure given on this page if you find that some channels have not been stored during the initial set-up.This
can happen if you are setting up cable network channels. Setting up channels manually requires every setting for a particular
channel to be entered, one at a time.

Display the

OVERVIEW menu by pressing the

MENU

button. Select the

Installation option and press

to confirm. Select the

Manual

instal. option from the INSTALLATION menu and press

confirm.

Select the

Standard option and then the relevant standard for your country using the

buttons.

Note: the following standards are available to choose from:

for the UK and Ireland,

for France and Luxembourg,

for Eastern Europe,

the Middle East and Asia,

EURO

for Western Europe, Australia and New Zealand.

Select the

Frequency option. Use the

button to start the search in descending or ascending order.When a

channel is found pictures appear.

If the picture is not clear you can adjust the setting.You do this by selecting the option

Fine tuning and adjusting it

with the

buttons.

If the channel is encrypted and you want to connect a decoder, select the

Decoder option and check the box by

pressing the

button.

Then select the

Character set option and choose the character set that will be used for Teletext on this channel using

the

buttons.The following character sets are available:

1 :Western Europe
2 : Eastern Europe
3 : Russian and Bulgarian
4 : Greek
5 : Arabic
6 : Ukrainian
7 : Belarussian
The character set selected determines how characters are displayed on Teletext screens.

Select the

Store on number option to assign a number to the channel. Enter the number using the numeric buttons.

Press the

button to confirm.

Important: as soon as you change a setting in the

MANUAL INSTALLATION

menu the channel number starts flashing under the

Store on number

option. To confirm your change you must select the

Store on number

option and press

. If you do not confirm the

change it will be cancelled when you change channel or put the television into standby mode.

Repeat this procedure to find other channels.

Favourite channels

With this menu you can choose the 6 channels you watch the most to access them more quickly in the future (see page 7).

Bring up the

OVERVIEW screen by pressing the

MENU

button. Go to the Installation line and press

to confirm.

In the INSTALLATION menu, go to the Favourites line and press

to confirm.

Proceed from line to line by means of the

buttons and choose your 6 favourite channels.

MANUAL INSTALLATION

Return

Standard

UK...

Frequency

150.75 MHz

Fine tuning

Store on number

Decoder

Teletext char. set

1...

06-EFC031-EN.qxd 4/07/05 18:45 Page 6