Toshiba 55TL515U Benutzerhandbuch

Chapter 6: Basic features

Adjusting the amplifier’s audio

Using the TV’s remote control, you can adjust or mute
the sound volume of your amplifier.
•

adjust the volume level.

•

turns off the sound.

Note:

This feature is available when Amplifier Control is set

to On.

> Settings > PREFERENCES > HDMI-CEC

Control Setup

Press B or b to highlight Speaker Preference.

Press C or c to select Amplifier.

Note:

Confirm that a connected HDMI

CEC device

(such as DVD player, etc.) is selected for the Amplifier
input source.

Note:
• You can also use this function when the amplifier is

connected to the TV’s DIGITAL AUDIO OUT terminal
(not HDMI connection). Select a digital audio input mode
on the amplifier.

• These functions depend on the device connected.

Other HDMI

CEC Control functions

When Enable HDMI-CEC Control and all items in the
HDMI-CEC Control Setup

menu are set to On, the

following functions will be enabled.

Note:

When you turn on the amplifier, change its input

source, or adjust the sound volume, the sound will be
output from the amplifier’s speakers even if TV Speakers
has been selected. Turn the TV off and on again to output
the sound from the TV speakers.

Using the HDMI

settings feature

Note:

If some HDMI legacy sources do not work properly

with your HDMI TV, set INSTAPORT

™

to Off. Adjusting this

setting should allow your HDMI legacy source to operate
properly with your TV.

The RGB Range setting requires appropriate HDMI
source devices. If your HDMI source device does not
support this feature, the TV may not work properly
when it is enabled.

Note:

If your HDMI connection is capable of 1080p and/or

your TV is capable of refresh rates greater than 60 Hz, you
will need a High Speed HDMI

cable. Conventional HDMI/

DVI cables may not work properly with this mode.

Select the appropriate HDMI input mode (HDMI 1,
HDMI 2, HDMI 3, or HDMI 4).

> Settings > PREFERENCES > AV

Connection

Press B or b to select HDMI Settings. Press

Press B or b to select an item.

Press C or c to select a setting.

Viewing the HDMI

signal

information

> Settings > PREFERENCES > HDMI

Information Display

Press C or c to select On. Press Q. The normal
banner and signal information banner appear.

Note:
• The signal information banner will appear when this

feature is set to On and you watch an HDMI input.

• If you press

when this feature is set to Off, only the

normal banner will appear.

Item

Description

TV Auto
Power

If an HDMI

CEC device is turned on, the

TV turns on automatically.

Auto Standby

If the TV is turned off, it will send a
message to turn off all of the HDMI

CEC

devices connected to the TV.

Amplifier
Control

If Amplifier Control is set to On, you can
adjust the sound volume or turn off the
sound using the remote control.

Speaker
Preference

From this item, you can set your audio
output preference to the TV speakers or
the amplifier. When this item is set to
Amplifier

, the remote control can be used

to adjust or mute the volume of the
audio. This item will not be available and
set to TV Speakers automatically unless
an HDMI

CEC compatible audio

receiver is connected.

VOL

O K

Mode (default setting) Description

INSTAPORT

™

: On

Reduces the lag time when
switching HDMI sources.

RGB Range: Auto

Adjusts the RGB full range signal
automatically.
When Limited is selected, the RGB
output signal is output in the range
of 16 to 235. When Full is selected,
the RGB output signal is output in
the range of 0 to 255.

O K