Uniden TL27WRA-W Benutzerhandbuch

About connector covers 

27 and 32 inch models:
Press down on the lip at the top and pull 
towards you to remove it.

27 and 32 inch models: 
Insert the two protrusions at the 
bottom into the holes on the body, 
and press in the top until it is locked 
in place. Next, press in the center 
section to lock the protrusions on the
left and right.

* Take care not to pinch the cords.

Pass the cable through the notch in the cover. 
(The cover can also be removed.) 

SET

 UP

Press down 

here.

Pull this way. 

cover tabs

37 and 42 inch models:
Press on the two tabs on the right and pull 
towards you to remove it.

37 and 42 inch models:
Align the three tabs on the left into the 
holes on the body and press the into the 
left side until it is locked in place. Next, 
press the right section to lock in the right 
side tabs.  

cover tabs