Uniden TL27WRA-W Benutzerhandbuch
42
Other Settings (Cont’d)
Note
Setting the display language
If you select “Language” in the sub-menu, you can select from English or Japanese as the screen
display language.
Pressing the
display language.
Pressing the
/
buttons toggles the setting between “English” and “Japanese”.
* If you change the language setting, the language setting is immediately applied to other menu
displays.
displays.
Setting the Country selection
The country selection is used to appropriately set the broadcast channels the LCD TV automati-
cally tunes to. Pressing the
cally tunes to. Pressing the
/
buttons switches between “Australia” and “New Zealand”.
*If you change the country setting to other than the country you are in then broadcast channels
may not tune in properly.
may not tune in properly.
Resetting settings (restoring factory settings)
You can display the factory reset screen by pressing the power button on the TV with the
MENU
on
the TV held down with the TV turned off, and holding the MENU button on the TV down for at
least three seconds.
In the factory reset screen, you can select whether to execute or cancel execution of the reset.
least three seconds.
In the factory reset screen, you can select whether to execute or cancel execution of the reset.
You cannot reset settings by using the
MENU
button on the remote control. This operation can be
performed only from the MENU button on the TV.
TV SETTINGS