Venturer PLV76176 Benutzerhandbuch

E - 11

WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base

stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display,

comes into contact with it. Do NOT exert pressure on the front of the unit at any time because the screen

could crack.

1.  Disconnect all cables or cords connected to the unit.

2.  Lay the unit down on a flat surface with the back side facing

up. Please make sure to place a soft cushioned material (such

as a pillow or thick piece of foam) beneath the screen.

3.  To  install  the  base  stand,  place  the  base  stand  on  the

mounting slot, push the stand till it locks.

4.  To remove the base stand, keep pressing the locking area

of the base stand and pull downwards to release the base

stand.

This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3” x 3” (75mm

x  75mm)  mounting  kit  designed  for  flat-panel TVs  (sold  separately).  Mount  this  unit  according  to  the

instructions included in the mounting kit.

NOTE

Remove the base stand before mounting the unit on the wall.

PLV76176S7_IB_UL_090723.indd   11

7/24/2009   11:52:49