Ricoh IS 2060 Benutzerhandbuch
Copying
20
2
Copying from the Bypass Tray
Use the bypass tray to copy onto spe-
cial paper (OHP transparencies, label
paper (adhesive labels), thick paper
(for example postcards and enve-
lopes), thin paper), and copy paper
that cannot be loaded in the paper
trays.
cial paper (OHP transparencies, label
paper (adhesive labels), thick paper
(for example postcards and enve-
lopes), thin paper), and copy paper
that cannot be loaded in the paper
trays.
Preparation
When copying from the bypass
tray, select [1 Sided
When copying from the bypass
tray, select [1 Sided
→
→
→
→ 1 Sided] for
copying in [Dup./Combine/Series].
You can change the initial settings.
You can change the initial settings.
Important
❒ When paper larger than 433 mm in
size is used, the paper may become
wrinkled, may not be fed into the
machine, or may cause paper jams.
wrinkled, may not be fed into the
machine, or may cause paper jams.
❒ When copying onto special paper,
such as adhesive labels, be sure to
select “Face up” in
select “Face up” in
Copy Face Up/Down in Bypass
Mode”. If you select “Face Down”,
a paper misfeed may occur.
Mode”. If you select “Face Down”,
a paper misfeed may occur.
Note
❒ The sizes of paper you can use
with the bypass tray are as follows.
❒ The machine can automatically de-
tect the following sizes as standard
size copy paper.
size copy paper.
❒ If you want to use the size of paper
other than ones in the above table,
be sure to specify the size.
be sure to specify the size.
❒ When copying on OHP transpar-
encies or paper heavier than 105
g/m
g/m
2
(about 27.9 lb.), you need to
specify the paper type.
⇒”Paper
Type”in the General Settings
Guide
Guide
❒ If you want copies to be delivered
face down when placing the origi-
nals on the exposure glass, select
“Face down” for both”Eject Copy
Face Up/Down in Glass Mode”
and “Eject Copy Face Up/Down in
Bypass Mode” of the User Tools.
nals on the exposure glass, select
“Face down” for both”Eject Copy
Face Up/Down in Glass Mode”
and “Eject Copy Face Up/Down in
Bypass Mode” of the User Tools.
❒ If you have selected OHP transpar-
encies or thick paper paper in
“Special paper”, you cannot make
copies to be delivered face down.
“Special paper”, you cannot make
copies to be delivered face down.
❒ The maximum number of sheets
you can load into the bypass tray
depends on the paper type. The
m a x i m u m n u m b e r o f s h e e t s
should not execeed the upper lim-
it.
depends on the paper type. The
m a x i m u m n u m b e r o f s h e e t s
should not execeed the upper lim-
it.
AAAA
Open the bypass tray.
Metric
version
version
• Vertical: 100 – 305mm
• Horizontal: 139.7 – 600mm
Inch
version
version
• Vertical: 3.9" – 12.0"
• Horizontal: 5.5" – 23.6”
Metric
version
version
A3
L
, A4
L
, A5
L
, 100
×
148mm
Inch
version
version
A3
L
, 11"
× 17"
L
, 8
1
/
2
"
×
14"
L
, 5
1
/
2
"
× 8
1
/
2
"
L
, 100
×
148mm