VIZIO VF552XVT Benutzerhandbuch

VIZIO VF552XVT HDTV User Manual 
 

Your HDTV can be mounted on the wall for viewing. If 
you choose to mount your HDTV on the wall, follow the 
instructions below. 
1.  Write down the serial number located on the back of 

your HDTV:__ __ __ __ __ __  

 
2.  Remove the stand base and neck: 

a.  Disconnect the cables from your HDTV. 
b.  Place your HDTV face down on a soft, flat 

surface to prevent damage to the screen. 

c.  Remove the eight (8) screws holding the 

stand neck, and then remove the neck and 
base. Pull straight down on the base after 
removing the screws to disconnect it from the 
TV. 

 
3.  Mount your HDTV on the wall: 

a.  Attach your HDTV to a wall mount (sold 

separately) using the mounting holes in the 
back panel of your HDTV. 

b.  Read the instructions that came with your 

specific wall mount to properly hang your 
HDTV. 

 
Wall Mount Specs: 

•  Hole Pattern: 400mm x 200mm 

•  Screw Size: M6 Pitch 1.0mm 

When your HDTV is not mounted on the wall, use the included safety strap to attach your HDTV to the 
wall to reduce the chance of your HDTV being pulled over.  The Safety Strap should be used with 
common sense practice such as ensuring that children (or adults) do not climb up, grabbing the top of 
your HDTV and pulling it onto themselves. 
 

1. 

Attach one end of the strap to the wall:  
•  If you have a drywall finish attach it to a stud, using a 

washer underneath the screw head.   

•  If you have a solid wall you should use a lag bolt, 

again using a washer under the nut. 

 
 

2. 

Attach the other end of the Safety Strap to 
one of the upper wall mounting holes on 
the back of your HDTV, using a washer 
under the screw head. 

 
 

  

10 

 

www.VIZIO.com