GE 25423 Benutzerhandbuch

1.  Press Line 1.
2.  Look at all the other stations. If they all indicate line 1 is being used, the connection is 

correct.

 

 

OR

1.  Press the Intercom button. The display shows INTERCOM and ENTER CALLING PHONE ID. 
2.  Enter a phone ID by pressing an Intercom/Memo Log button (1-16). The display shows 

the phone ID you entered. If the phone ID you entered is connected to the system, you 

will hear a ring back tone (call through tone) at your phone. If the phone ID is not  

connected to the system, you will hear an error tone. NO ANSWER shows in the display 

and intercom is cancelled.

When programming the phone, if  at any time you wish to discontinue or stop  

programming, press the “Exit” button. Also , whenever you have made a program selection 

by pressing the Sel/Save button the display will shown “OK” for several seconds then will 

return to the MAIN MENU prompt display.

Set the display language to show messages in either English, Spanish, or French.
1.   Press the Menu button while in standby mode. The cursor in the display points to  

SET LANGUAGE.

2.   Press the Sel/Save button.
3.   Use the Vol (+ or -) buttons to scroll up or down to ENGLISH, ESPANOL, or FRANCAIS. 

The default is English.

4.   Press the Sel/Save button to save.

The ringer, speaker, and handset/headset volume is set independently with the  

Vol (+ or -) buttons. There are 8 possible volume settings per mode. The volume indicator 

scale is displayed during volume adjustment.
Ringer Volume
1.  While the phone is on the hook, press the Vol (+ or -) button. The phone rings  

according to the current setting.

2.  Tap the Vol (+ or -) buttons to adjust the volume one level at a time. The phone stores 

the setting after the last button press.