Panasonic WX-CC411 Benutzerhandbuch
11
Browser Operation
7
[SD memory card] button
This button is used to confirm the total storage capacity
and remaining storage capacity on the SD card inserted
into the Center Module. (p. 26)
and remaining storage capacity on the SD card inserted
into the Center Module. (p. 26)
8
[Quick] button
This button is used to confirm the operation settings that
were set by touching the
were set by touching the
(Quick Operation button)
on the Center Module. (p. 27)
9
[Backup] button
This button is used to back up Center Module settings
and the message voice source file. (p. 27)
and the message voice source file. (p. 27)
Maintenance
:
[Maintenance] button
This button is used to perform various maintenance tasks.
w
p The maintenance menu is for maintenance staff.
Altering settings and performing operations using the
maintenance menu may affect store operation.
maintenance menu may affect store operation.
Important
w
wConfiguring and Confirming
Settings at Installation
This section describes how to configure and confirm settings
related to installation, such as date and time settings,
network settings, each server setting, Network Camera
settings, help contact and site information.
To display this screen, click the [Installation] button in the
Setup menu panel.
related to installation, such as date and time settings,
network settings, each server setting, Network Camera
settings, help contact and site information.
To display this screen, click the [Installation] button in the
Setup menu panel.
w
q Confirming the date and time setting [Date
& time]
This function is used to confirm the date, time and daylight
saving time settings for the Center Module.
To display this screen, click the [Installation] button, then the
[Date & time] tab.
After authentication, the following screen will be displayed.
saving time settings for the Center Module.
To display this screen, click the [Installation] button, then the
[Date & time] tab.
After authentication, the following screen will be displayed.
[NTP/ Time zone]
Clicking on [NTP>>] displays the [Server] tab.
The NTP server settings can be configured in the [Server]
tab.
Clicking on [NTP>>] displays the [Server] tab.
The NTP server settings can be configured in the [Server]
tab.
[Center module time]
Displays the current date and time of the Center Module.
The date is displayed in the format of MONTH / DAY / YEAR.
The time is displayed as a 24-hour clock.
Displays the current date and time of the Center Module.
The date is displayed in the format of MONTH / DAY / YEAR.
The time is displayed as a 24-hour clock.
[Daylight saving time ON/OFF/AUTO]
Displays the setting for daylight saving time.
ON:
Displays the setting for daylight saving time.
ON:
Set the time to daylight saving time. (Advance the
current time by 1 hour)
current time by 1 hour)
OFF: Cancel daylight saving time.
AUTO: Daylight saving time is set based on the set date
AUTO: Daylight saving time is set based on the set date
and time to start and end (Month, week, day of the
week, time).
week, time).
[Daylight saving time Start date & time], [Daylight saving
time End date & time]
Displays the start date and time and end date and time
when Daylight Saving time is set to AUTO.
time End date & time]
Displays the start date and time and end date and time
when Daylight Saving time is set to AUTO.
WX-CC411_PGQP1741ZA_BG_en.indd 11
2014/01/17 15:17:37